JCB wetland excavator with the hottest track shoe

2022-10-03
  • Detail

JCB wetland excavator with track shoe width of 1.25 meters

Guide: peat (also known as peat: partially carbonized plant material, found in wet areas, used as fertilizer and fuel) is an important raw material today. People usually loosen, dry and clean peat first. The test method for film friction coefficient is mainly GB 10006, and then stack it with bulldozer, and finally ship it. Recently, JCB company in the company JS series excavator Foundation

peat (also known as peat: partially carbonized plant material, found in humid areas and used as fertilizer and fuel) is an important raw material today

people usually loosen, dry and clean the peat first, then pile it up with bulldozers, and finally ship it. Recently, JCB company developed an excavator based on its JS series excavator, which is especially suitable for peat operation. The coefficient on the panel of JS 130 excavation equipment will show that the deflector is equipped with a 1.25m ultra wide plastic track. The ground specific pressure of the equipment is only 0.19 kg/cm2, and the excavator is also equipped with a 2.0 cubic meter bucket

js 130 excavator is equipped with an advanced intelligent auxiliary management system to monitor and indicate the main work operations, including engine speed, hydraulic pump flow and automatic overload protection. Low fuel consumption control function and significantly increase production. The engine and hydraulic machinery are automatically adjusted to meet the requirements of their respective work. At the same time, they are equipped with enhanced functions, which are suitable for heavy load operation

The heart of JS 130 is a 70 kW turbocharged direct injection diesel engine. Powerful engine with high performance and high efficiency hydraulic conversion

PCL implants do not have these problems. JS 130 is equipped with plexus Filtersystem, which can provide high-definition full LCD numerical control to set the required parameters of hydraulic oil temperature, reaching the filtration value of 1.5 microns instead of the usual 10 microns. The oil filter can be replaced every 500 hours, the hydraulic oil filter can be replaced every 1000 hours, and the service life of the hydraulic oil can reach 5000 hours of operation time

Copyright © 2011 JIN SHI